Machine Information

96.5" (2450MM) X 25MM X 70,000# CUT-TO-LENGTH LINE

Stock #: 116559

Equipped With

96.5" (2450MM) X 25MM X 70,000# CUT-TO-LENGTH LINE
 
COIL WEIGHT  70000 POUNDS
WIDTH 96.5 INCHES
THICKNESS       .984 INCHES
ID           32 INCHES
MAX OD               94.5 INCHES
EQUIPPED WITH
YEAR: 2010
MATERIAL: HOT ROLLED STEEL STRIP (SS, S55C, SPAH, DAS, ATS ETC.)
THICKNESS: 3.2MM - 25MM
COIL WEIGHT: 35 TONS
COIL ID: 508MM, 610MM, 762MM, 812MM
COIL OD: 1,000MM - 2,400MM
COIL WIDTH: 900MM – 2,500MM
PLATE LENGTH: 2,000MM – 24,000MM
WORKING SPEED: MAX 27 MPM OR 17 MPM (2 STEP CHANGEABLE)
 
MOTOR POWER
ROUGH LEVELER: 400 KW DC
SCRAP CHOPPER: 63 KW X 1 SET, DC
1ST FINISH LEVELER: 264 KW DC
2ND FINISH LEVELER: 266 KW DC
FLYING SHEAR: 75 KW AC, 55 KW AC SERVO
 
COMPLETE CUT-TO-LENGTH LINE CONSISTING OF THE FOLLOWING COMPONENTS:
COIL CAR
UNCOILER
PINCH & ROUGH LEVELER
SURFACE BRUSHING UNIT W/ DUST COLLECTOR
SIDE TRIMMER & SCRAP CHOPPER W/ DISPOSAL UNIT
THREADING TABLE
1ST FINISH LEVELER
THREADING TABLE
2ND FINISH LEVELER
STRIP PRESS ROLLER
MEASURING ROLLER
FLYING SHEAR W/ TRAVERSE DEVICE
RUN OUT BELT TABLE
REJECT TABLE W/ SCRAP CAR
INSPECTION TABLE
SETTING ROLLER BEFORE PILING
NO. 1 & 2 PILERS
PILING ROLLER TABLE FOR SHOT PLATE
PILING TABLE FOR LONG PLATE
RECEIVING TABLE
HYDRAULIC CONTROL UNIT (ENTRY & EXIT)
ELECTRIC CONTROL PANEL (FOR MOTOR DRIVE, AC CONTROL, SERVO CONTROL, PLC, AUXILIARY)
OPERATOR DESK
 
INSTALLED AND UNDER POWER