Type: Rolling Mills, 2-HI
Manufacturer: RUESCH
Highlights: S/N SPECS AS PER BE/BQ EMAIL 4/8/24 J/V PO# EWR-7127 4/9/24 BE/BQ PRICE FROM MACHINERY INTL THROUGH: MACHINERY INTL CORP J/V NME 33% MCO 33% REN 33% LOCATION MANSFIELD, OH
Specifications:
|
|
|
Capacity (W) |
12" |
|
Type |
2 HI ROLLING MILL |
12" (305mm) x 12" (305mm) Ruesch 2 High
Stock # 14280
MANUFACTURER: RUESCH MACHINE CO. (USA)
TYPE: 2 HIGH REVERSING ROLLING MILL
PREVIOUS USE: BREAKDOWN MILL FOR GOLD AND SILVER
INTERMEDIATE MILL FOR COPPER/STEEL/ALUMINUM
CLADDING/BONDING MILL FOR DUAL STRIP
ROLL SIZE: 12" (305MM) DIA. x 12" (305MM) FACE WIDTH
ROLL BEARINGS: ROLLER BEARING
SCREWDOWNS: ELECTRO-MECHANICAL
MAXIMUM ROLL OPENING: 4.25" (108MM)
MILL STAND CROSS SECTION: 9" (228MM) x 10" (254MM)
WINDOW WIDTH: 13-1/4" (336MM) x 41" (1041MM) HIGH
DIRECTION OF TRAVEL: RIGHT TO LEFT IF USED AS A CLADDING MILL
REVERSING CAPABILITY AS A STAND-ALONE MILL
MILL STAND DRIVE MOTOR: 50 HP, 230/460 VOLTS, 1750 RPM, 3 PHASE,
60 HZ VARIABLE SPEED
GEAR BOX: HORSBURGH & SCOTT RATIO 137.45 TO 1
MILL SPEED: 0 - 80 FPM (0 - 25 M/MIN)
A.C. VARIABLE SPEED DRIVE: PARKER A.C. INTEGRATOR 690+ SERIES WITH
HTTL ENCODER
PAYOFF: BUYER MUST SUPPLY
ROLLING MILL: AS PER SPECS ABOVE
WINDER:
-ENTRY STRIP SIDE GUIDES
-PNEUMATIC STRIP HOLD-DOWN ROLLS
-WINDER MANDREL: 2-1/2" (63.5MM) DIAMETER
9" (228MM) WIDE
-VARIABLE SPEED CONTROLS
NO. OF ROLLS:
-FLAT ROLLS: 1 SPARE SET
-SHELL ROLLS: 1 SET IN MILL
FLOOR SPACE:
-MILL STAND ALONE: 124" (3150MM) WIDE X 138" (3505MM) DEEP
**Temporary Specifications Subject to Revisions**
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO BUYERS VERIFICATION**
|
Stock #: 116361
Specifications:
Capacity (W)
12"
Type
2 HI ROLLING MILL
12" (305mm) x 12" (305mm) Ruesch 2 High Stock # 14280 MANUFACTURER: RUESCH MACHINE CO. (USA) TYPE: 2 HIGH REVERSING ROLLING MILL PREVIOUS USE: BREAKDOWN MILL FOR GOLD AND SILVER INTERMEDIATE MILL FOR COPPER/STEEL/ALUMINUM CLADDING/BONDING MILL FOR DUAL STRIP ROLL SIZE: 12" (305MM) DIA. x 12" (305MM) FACE WIDTH ROLL BEARINGS: ROLLER BEARING SCREWDOWNS: ELECTRO-MECHANICAL MAXIMUM ROLL OPENING: 4.25" (108MM) MILL STAND CROSS SECTION: 9" (228MM) x 10" (254MM) WINDOW WIDTH: 13-1/4" (336MM) x 41" (1041MM) HIGH DIRECTION OF TRAVEL: RIGHT TO LEFT IF USED AS A CLADDING MILL REVERSING CAPABILITY AS A STAND-ALONE MILL MILL STAND DRIVE MOTOR: 50 HP, 230/460 VOLTS, 1750 RPM, 3 PHASE, 60 HZ VARIABLE SPEED GEAR BOX: HORSBURGH & SCOTT RATIO 137.45 TO 1 MILL SPEED: 0 - 80 FPM (0 - 25 M/MIN) A.C. VARIABLE SPEED DRIVE: PARKER A.C. INTEGRATOR 690+ SERIES WITH HTTL ENCODER PAYOFF: BUYER MUST SUPPLY ROLLING MILL: AS PER SPECS ABOVE WINDER: -ENTRY STRIP SIDE GUIDES -PNEUMATIC STRIP HOLD-DOWN ROLLS -WINDER MANDREL: 2-1/2" (63.5MM) DIAMETER 9" (228MM) WIDE -VARIABLE SPEED CONTROLS NO. OF ROLLS: -FLAT ROLLS: 1 SPARE SET -SHELL ROLLS: 1 SET IN MILL FLOOR SPACE: -MILL STAND ALONE: 124" (3150MM) WIDE X 138" (3505MM) DEEP **Temporary Specifications Subject to Revisions** **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECIFICATIONS ARE SUBJECT TO BUYERS VERIFICATION**