37" WATERBURY FARREL 2 HI SKIN PASS MILL

Request Quote Share Listing | Print Specs
Model: Not Specified
Year: 1969
Stock #: 113265

Type: Rolling Mills, 2-HI

Manufacturer: WATERBURY FARREL

Highlights: BECH

Specifications

Request Quote Share Listing | Print Specs

Equipped With

YEAR:   1969
 
SPECIFICATIONS
MILL SECTION:   2 HI
MILL TYPE:   NON REVERSING
MATERIAL:   STAINLESS STEEL, CARBON STEEL
 
STRIP WIDTH DATA
MAXIMUM:  37IN/939.802MM
MINIMUM:  14IN/355.601MM
ENTRY GAUGE MAXIMUM:  0.125IN/3.175MM
EXIT GAUGE MINIMUM:  0.008IN/0.203MM
MAXIMUM COIL SIZE (WINDER) O.D.:  48IN/1219.202MM
COIL SIZE (WINDER) I.D.:  20IN/508.001MM
MAXIMUM COIL WEIGHT:
ABSOLUTE COIL WEIGHT:  14,200LBS/6441.077747KG
 
MILL DATA/
MILL SPEED (MAX):  500FPM/152.40MPM
MILL SPEED (MIN):  250FPM/76.20MPM
MILL POWER, MAIN MOTOR:  250HP/186.424968KW
650/1300 RPM, WATER COOLED, EDDY CURRENT CLUTCH
44O VOLT, 3PH, 60 CYC
PINION STAND RATIO16.8 : 12 SPEED
 
MILL ROLLS
WORK ROLL NOMINAL DIAMETER:  25IN/635.00127MM
BACK UP ROLL DIAMETER42IN/1066.802134MM
MILL BEARINGS , ROLLER TYPE/
 
WINDERS
WINDER POWER:  150HP/111.8549808KW
WATER COOLED, EDDY CURRENT CLUTCH
440 VOLT, 3 PH, 60 CYC
 
WINDER MANDREL:
DIAMETER:  20IN/508.001016MM
FACE:  42IN/1066.802134MM
MANDREL TYPE:  EXPANDABLE, 19.687" CLOSED
 
WINDER TENSION:
MAXIMUM:  15,000LBS/6803.955366KG
INTERMEDIATE  TO 650 FPM:  LBS/0KG
MINIMUM:  9,900LBS/4490.610542KG
GEAR REDUCER RATIO15.22 : 1
 
PAYOFF
POWER:  3HP, AC/2.237099616KW
TENSION:  8,332LBS/3779.370407KG
SPEED:  500FPM
MANDREL DIAMETER:  17.5IN/444.5MM
NOMINAL:  21.521.5IN/546.1MM
(WITH FILLERS):  25.0IN/635.0MM
WATER COOLED  BRAKE, MANUAL EDGE CONTROL
 
COOLANT -FILTER SYSTEM:
MILL DIRECTION:  RIGHT TO LEFT
 
LINE CONFIGURATION
COIL CAR:  FIXED, HYDRAULIC LIFT
PAYOFF REEL:  PAPER WINDER
ENTRY BRIDGE TABLE: HYDRAULIC OPERATION
SENSING HEADS
DEFLECTOR ROLL:
MAIN MILL FRAME:  (2) 20" DIA HYDRAULIC CYLINDER LOAD/ADJUSTMENT
ROLL POLISHING TOP AND BOTTOM
ROLL CHANGE SLED
DEFLECTOR ROLLPIVOTING FOR LOAD CELL
WINDER (LEFT):
COIL CAR:  HYDRAULIC LIFT
PAPER WINDER
MOTOR DRIVE CONTROLS:
OPERATOR CONTROL CONSOLE
OVERALL FLOOR DIMENSIONS, (L-R / F-B):  26 FT X 33 FT
 
CLICK ON THE FOLLOWING LINK TO WATCH A VIDEO OF THE MACHINE
 

Videos

Request a Quote











    Disclaimer about someone contacting them based on the information provided, anything else you want them to know at this point of contact.

    Machine Information

    37" WATERBURY FARREL 2 HI SKIN PASS MILL

    Stock #: 113265

    Equipped With

    YEAR:   1969
    

     
    

    SPECIFICATIONS
    

    MILL SECTION:   2 HI
    

    MILL TYPE:   NON REVERSING
    

    MATERIAL:   STAINLESS STEEL, CARBON STEEL
    

     
    

    STRIP WIDTH DATA
    

    MAXIMUM:  37IN/939.802MM
    

    MINIMUM:  14IN/355.601MM
    

    ENTRY GAUGE MAXIMUM:  0.125IN/3.175MM
    

    EXIT GAUGE MINIMUM:  0.008IN/0.203MM
    

    MAXIMUM COIL SIZE (WINDER) O.D.:  48IN/1219.202MM
    

    COIL SIZE (WINDER) I.D.:  20IN/508.001MM
    

    MAXIMUM COIL WEIGHT:
    

    

    ABSOLUTE COIL WEIGHT:  14,200LBS/6441.077747KG
    

     
    

    MILL DATA/
    

    MILL SPEED (MAX):  500FPM/152.40MPM
    

    MILL SPEED (MIN):  250FPM/76.20MPM
    

    MILL POWER, MAIN MOTOR:  250HP/186.424968KW
    

    650/1300 RPM, WATER COOLED, EDDY CURRENT CLUTCH
    

    44O VOLT, 3PH, 60 CYC
    

    PINION STAND RATIO16.8 : 12 SPEED
    

     
    

    MILL ROLLS
    

    WORK ROLL NOMINAL DIAMETER:  25IN/635.00127MM
    

    BACK UP ROLL DIAMETER42IN/1066.802134MM
    

    MILL BEARINGS , ROLLER TYPE/
    

     
    

    WINDERS
    

    

    

    WINDER POWER:  150HP/111.8549808KW
    

    WATER COOLED, EDDY CURRENT CLUTCH
    

    440 VOLT, 3 PH, 60 CYC
    

     
    

    WINDER MANDREL:
    

    DIAMETER:  20IN/508.001016MM
    

    FACE:  42IN/1066.802134MM
    

    MANDREL TYPE:  EXPANDABLE, 19.687" CLOSED
    

     
    

    WINDER TENSION:
    

    MAXIMUM:  15,000LBS/6803.955366KG
    

    INTERMEDIATE  TO 650 FPM:  LBS/0KG
    

    MINIMUM:  9,900LBS/4490.610542KG
    

    GEAR REDUCER RATIO15.22 : 1
    

     
    

    PAYOFF
    

    

    

    POWER:  3HP, AC/2.237099616KW
    

    TENSION:  8,332LBS/3779.370407KG
    

    SPEED:  500FPM
    

    MANDREL DIAMETER:  17.5IN/444.5MM
    

    NOMINAL:  21.521.5IN/546.1MM
    

    (WITH FILLERS):  25.0IN/635.0MM
    

    WATER COOLED  BRAKE, MANUAL EDGE CONTROL
    

     
    

    COOLANT -FILTER SYSTEM:
    

    MILL DIRECTION:  RIGHT TO LEFT
    

     
    

    LINE CONFIGURATION
    

    COIL CAR:  FIXED, HYDRAULIC LIFT
    

    PAYOFF REEL:  PAPER WINDER
    

    ENTRY BRIDGE TABLE: HYDRAULIC OPERATION
    

    SENSING HEADS
    

    

    

    DEFLECTOR ROLL:
    

    MAIN MILL FRAME:  (2) 20" DIA HYDRAULIC CYLINDER LOAD/ADJUSTMENT
    

    ROLL POLISHING TOP AND BOTTOM
    

    ROLL CHANGE SLED
    

    DEFLECTOR ROLLPIVOTING FOR LOAD CELL
    

    WINDER (LEFT):
    

    COIL CAR:  HYDRAULIC LIFT
    

    PAPER WINDER
    

    MOTOR DRIVE CONTROLS:
    

    OPERATOR CONTROL CONSOLE
    

    OVERALL FLOOR DIMENSIONS, (L-R / F-B):  26 FT X 33 FT
    

     
    

    CLICK ON THE FOLLOWING LINK TO WATCH A VIDEO OF THE MACHINE
    

    

    https://www.youtube.com/watch?v=Ss0ceKzuhKA