Machine Information

5” X .180” ABBEY ETNA TUBE MILL LINE

Stock #: 115437

Equipped With

Round Tube Diameter: 1” - 5”
Max Square Tube: 4”
Max Rectangle: 2” x 6”
Wall Thickness: .049” - .180”
Line Speed: 250 FPM
Maximum D/T Ratio: 50:1 Approx
Minimum D/T Ratio: 14:1. Approx
Line Direction: Left to Right
 
Complete Line with: 
 
3 Arm Loopco Turnstile
 
Entry L-Type Coil Car
Mandrel Uncoiler
Loopco Peeler / Hold Down Roll
5 Roll Flattener
 
Guild Shear & Welder
Torch and Power Supply
Pinch Roll Stand
Guild Horizontal Accumulator
Edge Prep Station
 
Abbey Etna Forming Mill
4 Forming Stands
3 Side Guide Roll Stands
3 Side Roll Cluster
3 Finn Pass Stands
75 HP DC Forming Drive
50 HP DC Finn Pass Drive
 
Exit Seam Guide Roll
2 Speed Gear Boxes
2 Roll Weld Box
2 Seam Guide Rolls
2 OD Scaring Stands
 
400 KW Thermatool / Inductoguild High Frequency Welder
30’ Cooling Trough
 
Abbey Etna Sizing Mill
3 Sizing Stands 
3 Side Idler Rolls
50 HP DC Sizing Drive
2 Speed Gear Box
 
2 OD Scaring Stands
 
400 KW Thermatool / Inductoguild High Frequency Welder
30’ Cooling Trough
 
Abbey Etna Sizing Mill
3 Sizing Stands 
3 Side Idler Rolls
50 HP DC Sizing Drive
2 Speed Gear Box
2 Squaring Stands with Side Clevis’s
2 30 HP DC Squaring Stand Drives
Turks Head
 
Alpha Inclined Cut-Off
Hydraulic Die Accelerator
Tallyrand Measuring
Digital Readouts
Touch Screen
 
30’ Run Out Table
Side Discharge Stackers
 
Tooling Sizes:
SIZE FORMING FINS SIZING 
ROUND 
5" 1 1 1
4.5” 1 1 1
4” 1 1 1
3.75” 1 1
3.5” 1 1 1
3.125” 1 1 1
3” 1 2 2
2.813” 1 1 1
2.5” 1 2 2
2.188” 
1.875” 1 2 2 
1.562” 1 2 2
 
SIZE SQUARING 
OVALS 
3.386” X 5.660” 1
2.440” X 5.240” 1
2.739” X 1.039” 1
2.254” X 3.783” 1
1.780” X 3.710” 1
 
TRAPEZOID FORMING FINS SIZING SQUARING 
1.625” X 4.375” 1 1 1 1
2” X 3.375” 1 1 1 1
 
 
SQUARES SQUARING
 
4” 2
3” 2
2.5” 1
2” 4
1.5” 4
1.25” 2
 
RECTANGLES 
 
2” X 6” 2
2” X 5” 1
2” X 4” 1
1” X 4” 
2” X 3” 1
1” X 3” 
1.5” X 2.5” 
1.5” X 2” 
1” X 2” 
1” X 1.5” 2