Machine Information

76" x .100" x 72K AUTOMATIC FEED TRAPEZOID CUT-TO-LENGTH LINE - UPGRADE 2020

Stock #: 115426

Equipped With

LINE OVERVIEW:
 
THIS IS AUTOMATIC FEED COMPANY TRAPEZOID CUT TO LENGTH LINE HAD A MULTIMILLION DOLLAR CONTROLS, MOTOR AND STACKER UPGRADE IN 2020 BY AUTOMATIC FEED COMPANY. THE LINE IS RUNNING AND IN OPERATION IN USA PLANT.
 
GENERAL LINE SPECIFICATIONS:
MANUFACTURER - AUTOMATIC FEED COMPANY

YEAR - 1989 (NEW CONTROLS UPGRADE 2020)
TYPE - TRAPEZOID CUT TO LENGTH LINE
MATERIAL - 0.020" - 0.100"
YIELD STRENGTH - 25,000 PSI - 40,000 PSI


DEPENDING ON WIDTH & THICKNESS A HIGHER YIELD STRENGTH IS FEASIBLE. CONTACT OUR OFFICE FOR FURTHER INFORMATION

WIDTH RANGE - 24" - 76"
TRIM WIDTH - 74"
ID RANGE - 19" - 25"

OD RANGE - 36" - 84"
LINE SPEED - 300 FPM

SHEAR SPM - 18 - 70
SHEAR ANGLE CUTS - 30 DEGREES MAXIMUM +/-
SHEAR STROKE - 6"
SHEAR SHUT HEIGHT - 30"

STACKER WIDTH RANGE - 24" - 74"
STACKER LENGTH RANGE - 24" - 168"

MAXIMUM STACK WEIGHT - 20,000#
MAXIMUM LIFT & TRANSPORT WEIGHT - 40,000#
MAXIMUM STACK HEIGHT - 24" (INCLUDING DUNNAGE)
LINE DIRECTION - RIGHT TO LEFT


GENERAL LINE COMPONENTS:
(4) STATION TRAVELING COIL STORAGE RACK




V-TYPE TRAVELING COIL CAR W/ HYDRAULIC LIFT 
ANTI-TIP GUIDES


DUAL STUB MANDREL EXPANDING UNCOILER
AC MOTOR - 125 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER


HOLDDOWN ROLL & PEELER ASSEMBLY




PINCH ROLL AND ENTRY CROP SHEAR ASSEMBLY W/ SCRAP CONVEYOR


EDGE TRIMMING UNIT


BUTECH MDL. SC-250 SCRAP CHOPPERS
(4) AC MOTORS - 30 HP, 1750 RPM & (3) SERIES 2400 MODULAR FLUX VECTOR AC INVERTERS


(FOR THE PINCH ROLL, SCRAP CHOPPER, ENTRY PINCH ROLL, AND EXIT PINCH ROLL)

WASHING & RINSE UNIT WITH HIGH PRESSURE PUMP & FILTER SYSTEM

19 ROLL 5HI PRECISION LEVELER
1.9375" ROLL DIAMETER
76" WIDTH
AC MOTOR - 250 HP, 1150 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER



LOOPING PIT #1 & INSPECTION TABLE

ECT STRIP OILER

PINCH ROLL ASSEMBLY

LOOPING PIT #2



THREADING TABLE

DIGITAL CONTROLLED ROLL FEED
AC MOTOR - 100 HP, 1000 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER

UPCUT SHEAR
AC MOTOR - 30 HP, 0-1750 RPM



OSCILLATING/TRAPEZOID SHEAR ASSMEBLY
DIES STYLE - CASSSETE TYPE - MULTIPLE DIES AVAILABLE
AC MOTOR - 75 HP, 1150 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER

BELT RUNOUT CONVEYOR
AC MOTOR - 30 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER FOR EACH STACKER



MAGNETIC BELT CONVEYOR & TWO STATION MAGNETIC STACKER
AC MOTOR - 30 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER FOR EACH STACKER


NEW MAGNET SYSTEM INSTALLED IN 2020 WITH FUTURE AREAS FOR VACCUUM CHAMBERS
REJECT PILER
LEFT AND RIGHT DISCHARGE TRANSFER CONVEYOR




AC MOTOR - 15 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER
100' + RUNOUT OUT CONVEYOR ON RIGHTHAND (R-L DIRECTION) OF STACKER WITH SCALES

EXTENSIVE ELECTRICAL AND CONTROLS UPGRADE IN 2020 INCLUDING:


NEW ALLEN BRADLEY PLC UPGRADE FOR LINE AND STACKER WITH CONTROLOGIX WITH
GUARDLOGIX PROCESSORS & DYNICS TOUCHSCREENS
NEW COIL LINE & STACKER ADJUSTMENT FEEDBACK DEVICES
AUTOMATIC FEED COMPANY'S AUTOMATION INTEGRATION MANAGER (AIM) VISUAL BASIC


OPERATOR INTERFACE
NEW SAFETY DEVICES ON COIL LINE AND STACKER
108 NEW MAGNET ASSEMBLIES FOR THE STACKER AND ALLOW ROOM FOR VACCUUM CHAMBERS
IN THE FUTURE

UNICO AC SERVER DRIVES INTEGRATED TRHOUGHOUT THE LINE
UNICO SERIES 4000 SERVO DRIVE CONTROLLERS THROUGHOUT THE LINE
PROVIDE AUTOTHREAD CAPABILITY STARTING AFTER THE CROP SHEAR