Machine Information

25" WATERBURY-FARREL, 2-HI SKIN PASS MILL

Stock #: 117063

Equipped With

25" WATERBURY FARREL 2 HI SKIN PASS MILL


SPECIFICATIONS
MILL SECTION:   2 HI
MILL TYPE:   NON REVERSING
MATERIAL:   STAINLESS STEEL, CARBON STEEL
 
STRIP WIDTH DATA
MAXIMUM:  25.000IN/635.001MM
MINIMUM:  IN/0.000MM
ENTRY GAUGE MAXIMUM:  0.030IN/0.762MM
EXIT GAUGE MINIMUM:  0.003IN/0.076MM
MAXIMUM COIL SIZE (WINDER) O.D.:  44.000IN/1117.602MM
COIL SIZE (WINDER) I.D.:  16.000IN/406.401MM
MAXIMUM COIL WEIGHT:  0.000

ABSOLUTE COIL WEIGHT:   9,375 LBS/ 4,252 KG
 
MILL DATA/
MILL SPEED (MAX):  500FPM/152MPM
MILL SPEED (MIN):  250FPM/76MPM
MILL POWER, MAIN MOTOR:  150HP/112KW
1800 RPM, WATER COOLED, EDDY CURRENT CLUTCH
44O VOLT, 3PH, 60 CYC
PINION STAND RATIO34.62 & 17.39 2 SPEED
 
MILL ROLLS
WORK ROLL NOMINAL DIAMETER:  20.000IN/508.001MM
BACK UP ROLL DIAMETER30.000IN/762.002MM
MILL BEARINGS , ROLLER TYPE/
 
WINDERS
WINDER POWER:  300HP/224KW
WATER COOLED, EDDY CURRENT CLUTCH
440 VOLT, 3 PH, 60 CYC
 
WINDER MANDREL:
DIAMETER:  16.000IN/406.401MM
FACE:  28.000IN/711.201MM
MANDREL TYPE:  EXPANDABLE, 15.646" CLOSED
 
WINDER TENSION:
MAXIMUM:   7,200 LBS/ 3,266 KG
INTERMEDIATE  TO 650 FPM:  LBS/ -   KG
MINIMUM:  LBS/ -   KG
GEAR REDUCER RATIO13.8 : 1
 
PAYOFF
POWER:  HP, AC/0KW
TENSION:  4000LBS/ 1,814 KG
SPEED:
MANDREL DIAMETER:  14.5 TO 17.5IN/MM
NOMINAL:  16.000IN/406.401MM
(WITH FILLERS):  IN/0.000MM
WATER COOLED  BRAKE, MANUAL EDGE CONTROL
 
COOLANT -FILTER SYSTEM:
MILL DIRECTION:  RIGHT TO LEFT
 
LINE CONFIGURATION
COIL CAR:  FIXED
PAYOFF REEL:
DEFLECTOR ROLL:
MAIN MILL FRAME:  (2) 15" HYDRAULIC CYLINDER LOAD/ADJUSTMENT
ROLL POLISHING TOP AND BOTTOM
DEFLECTOR ROLLPIVOTING FOR LOAD CELL
WINDER (LEFT):
"L" SHAPED COIL CAR
MOTOR DRIVE CONTROLS:
OPERATOR CONTROL CONSOLE
 
OVERALL FLOOR DIMENSIONS, (L-R / F-B):  20'-6" X 17'-3"