Machine Information

96" x .500" x 90,000# (2489mm x 12.7mm x 45 TON) MECO/BRADBURY TEMPER MILL CUT-TO-LENGTH LINE

Stock #: 117132

Equipped With

MANUFACTURER - MECO, BRADBURY, BUTECH, STRILICH
STATUS - INSTALLED & OPERATING
 
YEAR - 1998 (WITH UPGRADES)
LINE DIRECTION - LEFT to RIGHT
MATERIALS - HOT ROLLED STEEL (PICKLED or BLACK)
THICKNESS - 12.7 mm (.500") MAX., 1.7 mm (.065") MIN.
COIL WIDTH - 2489 mm (98") MAX., 1219 mm (48") MIN.
COIL WEIGHT - 40823 kg (90,000#) MAX.
COIL OUTSIDE DIAMETER - 2134 mm (84") MAX., 1219 mm (48") MIN.
COIL INSIDE DIAMETER - 711 mm (28") to 813 mm (32")
CUT SHEET LENGTH - 18288 mm (720") MAX., 1219 mm (48") MIN.
MAX. BUNDLE HEIGHT - 610 mm (24")
MAX. BUNDLE WEIGHT - 36287 kg (80,000#) PER 6096 mm (240") CONVEYOR SECTION

LINE SPEED - 76 MPM (250 FPM) MAX. BELOW 6.35 mm (.250") THICK and 46 MPM (150
FPM) MAX. ABOVE 6.35 mm (.250") THICK
 
LINE COMPONENTS:
 
ENTRY COIL STORAGE SADDLES w/ SPACE FOR SEVEN (7) MAXIMUM WIDTH COILS
 
ENTRY COIL WEIGH STATION
 
FLOOR LEVEL COIL LOADING CAR #1 (PERPENDICULAR TRAVEL TO UNLOAD SADDLES)
 
FLOOR LEVEL COIL LOADING CAR #2 (PARALLEL TRAVEL TO LOAD UNCOILER)
 
DUAL EXPANDING MANDREL UNCOILER
(1) 55.9 Kw (75 HP) DRIVE ON EACH MANDREL

PIVITING HOLD DOWN ROLL
TWO (2) DRIVEN ROLLS AND HEAVY DUTY ANVIL TO ASSIST BACK BENDING WITH THE
PEELER
 
PIVOTING AND TELESCOPING PEELER BLADE w/ REPLACEABLE TIP
 
FIVE (5) ROLL ENTRY PINCH ROLL AND FLATTENER ASSEMBLY
(1 )55.93 Kw (75 HP) DRIVE
 
ENTRY CROP SHEAR AND SCRAP DISPOSAL SYSTEM
 
TEMPER MILL THREADING TABLE
 
MECO FOUR (4) HIGH NON-REVERSING TEMPER MILL
(2) 482.6 mm (19") DIAMETER WORK ROLLS
(2) 1117.6 mm (44") DIAMETER BACKUP ROLLS



(2) 372.85 Kw (500 HP) DRIVES
 
STRIP ACCUMULATION TABLE w/ ENTRY DEFLECTOR ROLLS, ELEVATING HUMP ROLL & EXIT
DEFLECTOR ROLLS
 
PLATE TYPE STRIP CENTERING GUIDES
 
LEVELER ENTRY PINCH ROLL ASSEMBLY
(1) 36.78 Kw (50 HP) DRIVE
 
BRADBURY HEAVY GAUGE ELEVEN (11) ROLL FOUR (4) HIGH HYDRAULIC LEVELER
(11 )171.5 mm (6.75") DIAMETER WORK ROLLS
(7) ADJUSTABLE BACKUP FLIGHTS
(1) 447.42 Kw (600 HP) DRIVE
 
STRIP INSPECTION TABLE

BRADBURY LIGHT GAUGE ELEVEN (11) ROLL FOUR (4) HIGH HYDRAULIC LEVELER
(11) 88.9 mm (3.50") DIAMETER WORK ROLLS
(9) ADJUSTABLE BACKUP FLIGHTS
298 Kw (400 HP) DRIVE
(CURRENTLY NOT IN OPERATION)
 
INKJET STRIP MARKING SYSTEM
MATTHEWS STENCILER SYSTEM (MPERIA V-SERIES VIAJET DOD MARKING SYSTEM)
 
PLATE TYPE STRIP CENTERING GUIDES
 
SHEAR ENTRY PINCH ROLL ASSEMBLY
(1)  11 Kw (15 HP) DRIVE
 
BUTECH SINGLE RAKE OSCILLATING SHEAR w/ QUICK CHANGE KNIFE ASSEMBLY

(1) 221 Kw (300 HP) OSCILLATING DRIVE & (1) 110 Kw (150 HP) RAM DRIVE
 
CUT SHEET TRANSFER CONVEYOR w/ NON-MARKING BELTS AND PIVOTING REJECT STATION
 
STACKER DECELERATION ROLLS
 
STRILICH SHEET STACKER
THREE (3) 6.1 METER (20 FOOT) ZONES
ADJUSTABLE END STOP
PIVOTING SUPPORT ARMS
POWERED SQUARING GUIDES
 
60' END DISCHARGE STACKER RUNOUT CONVEYORS w/ DRIVEN ROLLERS
 
60' NINETY (90) DEGREE ROTATING CONVEYOR w/ DRIVEN ROLLERS



60' OFFLINE STORAGE CONVEYOR #1 w/ DRIVEN ROLLERS
 
60' OFFLINE STORAGE CONVEYOR #2 w/ DRIVEN ROLLERS
 
60' OFFLINE STORAGE CONVEYOR
 
OPERATOR CONTROL STATIONS
 
AC CONTROLS
 
VARIABLE SPEED DRIVE CONTROLS
 
CLOSED LOOP HYDRAULIC SYSTEM